Features

• Applications: marine, industrial, military, construction sites, wherever portable personnel protection is needed.
  
  
• Front panel includes Audible Alarm when input voltage is "out-of-range" plus indicator lights; Fault Test switch, Fault Reset switch, Over-current Reset switch, and Fault indicator light.
  
  
• Operating temperature: -35 C. to + 48 C.
  
  
• All semiconductor switching. No unreliable relay contacts to arc and weld together.
  
  
• Internal isolation transformer for additional protection.
  
  
• State-of-the-art high reliability design: single point component failures either remove output voltage or do not prevent ground fault detection.

    Electrical Specifications

• Input: 115 VAC +/- 13%, 60 HZ, +/- 5%.
  
  
• Output power: 1725 VA max., continuous.
  
  
• Fault current: 5 ma., adjustable, both hot and neutral to ground.
  
  
• Over-current protection: 20 A. electronic sensing and shutdown. No fuses or circuit breakers.
  
  
• Fault trip time: < 16 millisec., relative to phase of input sine wave at time of fault.
  
  
• Input voltage spike withstand: +/- 1KV.
  
  
• Output voltage regulation: +/- 5% NL to FL.

    Mechanical Specifications

• Outside dimensions: 12.5" H x 15" W x 17" L.
  
  
• Sealed top lid opens for internal access.
  
  
• Weight: 70 lbs. (approx.)
  
  
• Two lifting handles.
  
  
• Four covered output receptacles (NEMA 5-15R).
  
  
• Single input heavy duty power cable/plug.
  
  
• Internal shock isolators support electronic component shelf.
  
  
• Enclosure is NEMA 4X, stainless steel, weather resistant.

    Features

• Applications: marine, diving, fire and safety vehicles, damp environments, industrial, military, commercial, construction sites, home use, outside or inside, anywhere portable personnel protection from faulty hand tools or lighting is needed.
  
  
• Light weight, sealed heavy gauge aluminum box painted OSHA Yellow.
  
  
• Multiple output receptacles to accomodate several output loads simultaneously.
  
  
• Powers up immediately when plugged in.
  
  
• TEST and RESET push-buttons conveniently located on top to assure working condition.
  
  
• Ground fault starts buzzer beeping and removes output a.c. power from receptacles.
  
  
• Operating temperature: -35C to +66C (-31F to +149F).
  
  
• All semiconductor switching. No unreliable relay contacts to arc and weld together.
  
  
• Internal electronic over-current circuit removes output power if load current exceeds rating.
  
  
• Designed to meet or exceed UL943 and CSA-22.2 No. 144-M91 saftey specs.
  
  
• Meets usage requirements defined by the National Electrical Code 2002 and OSHA.
  
  
• State-of-the-art high reliability design: single point component failures either remove output voltage or do not prevent ground fault detection.
  
  
• US Pat. 6,804,094.

    Electrical Specifications

• Input: 110 to 125 VAC, 120VAC nominal, 60 HZ, grounded neutral.
  
  
• Rated output current: 15 A. max. for Sandy Hook15; 20A. max. for Sandy Hook20.
  
  
• Power capability (continuous): 1800VA for Sandy Hook15; 2400VA for Sandy Hook20.
  
  
• Fault current: 6 ma. trip min. per UL493, Class A. Sharp cutoff of faults less than 6 ma. prevents spurious (false) trips from high leakage power tool cables. Fault current can be factory adjusted for special values.
  
  
• Fault trip time: 2 - 16 millisec., relative to phase of input a.c. sine wave at time of fault and size of fault current.
  
  
• Over-current protection: electronic sensing and shutdown. No fuse or circuit breaker.
  
  
• RESET button clears both a fault and an over-current event, allowing full 120VAC output to exist.
  
  
• 2 ft. input power cord with molded NEMA 5-15P, L5-15P, 5-20P, or L5-20P plug, depending on model.

    Mechanical Specifications

• Outside dimensions: 5" H x 6" W x 9" L.
  
  
• Weight: 7 lbs.
  
  
• Enclosure is NEMA-3R; is sealed against rain (water resistant).
  
  
• Two dual or four single covered output receptacles: NEMA 5-15R, L5-15R, 5-20R or L5-20R, depending on model.
  
  
• Can be operated in any of 3 positions if required. Not designed for permanent or post mounting. Portable only.
  
  
• Convection cooled; no internal fan.

    Where to Buy it